Branson Krautkramer MIC 10, User Manual

Page: 35 / 146

Changing the settings
You have the following adjustment possibilities with
functions having a large range (e.g. calibration value):
Changing 1 step at a time
–
Shortly press
^
or
8
.
The setting is increased or decreased by 1.
Accelerated and decelerated setting
–
Keep
^
or
8
pressed.
Setting is accelerated.
–
If, during the accelerated setting, the opposing
arrow key is pressed, i.e. with
^
pressed the
8
key
is used or vice versa, the setting is decelerated.
–
As soon as you release the opposing arrow key, the
setting will be accelerated again.
Setting over a large range
If you wish to bridge larger ranges, you can change
the setting into larger steps.
–
Keep
^
or
8
pressed and simultaneously press
M
.
Resetting set functions
In the SET level you can reset all functions back to
their default setting after you have changed them:
–
Select the function and press
+
.
0
Note:
The functions Hi and Lo alarm thresholds are not
reset to their default settings but switched off.
Function blocking
In order to increase MIC 10 operating reliability you
can switch off the following functions, resp. inhibit any
changes, if you do not require them:
Switching off
•
all hardness scales except the one required
•
data storage function (Version MIC 10 DL)
•
Memory Card (Version MIC 10 DL)
Inhibit changes of
•
calibration
•
dwell time
•
Hi and Lo alarm threshold
Operation concept
Basics of operation
Krautkrämer MIC 10 Issue 08, 08/01 4-7
Changing the settings
You have the following adjustment possibilities with
functions having a large range (e.g. calibration value):
Changing 1 step at a time
–
Shortly press
^
or
8
.
The setting is increased or decreased by 1.
Accelerated and decelerated setting
–
Keep
^
or
8
pressed.
Setting is accelerated.
–
If, during the accelerated setting, the opposing
arrow key is pressed, i.e. with
^
pressed the
8
key
is used or vice versa, the setting is decelerated.
–
As soon as you release the opposing arrow key, the
setting will be accelerated again.
Setting over a large range
If you wish to bridge larger ranges, you can change
the setting into larger steps.
–
Keep
^
or
8
pressed and simultaneously press
M
.
Resetting set functions
In the SET level you can reset all functions back to
their default setting after you have changed them:
–
Select the function and press
+
.
0
Note:
The functions Hi and Lo alarm thresholds are not
reset to their default settings but switched off.
Function blocking
In order to increase MIC 10 operating reliability you
can switch off the following functions, resp. inhibit any
changes, if you do not require them:
Switching off
•
all hardness scales except the one required
•
data storage function (Version MIC 10 DL)
•
Memory Card (Version MIC 10 DL)
Inhibit changes of
•
calibration
•
dwell time
•
Hi and Lo alarm threshold
Operation concept
Basics of operation
Krautkrämer MIC 10 Issue 08, 08/01 4-7