Branson Krautkramer MIC 10, User Manual

Page: 121 / 146

TP - Read / set time for instrument switch-off
Syntax: <ESC>TP [ (n | ON) ]<CR>
Description:
Reading or setting the time after which the instrument
is switched off if not used. The variation range is from
30 seconds to 600 seconds. If On is given as par-
ameter, the instrument is permanently switched on.
Example:
<ESC>TP<CR> Read switch-off time
180S<CR><LF> Result: 180 seconds
<ESC>TP 300<CR> Increase switch-off time to
300 seconds
UN - Select the hardness scale
Syntax: <ESC>UN [ (HV | HRC | HRB |
HB | N/MM2) ] <CR>
Description:
Selecting hardness scale resp. display of active scale.
The default setting is
HV .
Example:
<ESC>UN<CR> Read active hardness scale:
HRC<CR><LF> Result: HRC
<ESC>UN HV <CR> Set HV scale
)
Warning:
When you change the hardness scale, the active
measurement set will be terminated beforehand.
Data transfer with a PC
Interface and peripherals (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 11-21
TP - Read / set time for instrument switch-off
Syntax: <ESC>TP [ (n | ON) ]<CR>
Description:
Reading or setting the time after which the instrument
is switched off if not used. The variation range is from
30 seconds to 600 seconds. If On is given as par-
ameter, the instrument is permanently switched on.
Example:
<ESC>TP<CR> Read switch-off time
180S<CR><LF> Result: 180 seconds
<ESC>TP 300<CR> Increase switch-off time to
300 seconds
UN - Select the hardness scale
Syntax: <ESC>UN [ (HV | HRC | HRB |
HB | N/MM2) ] <CR>
Description:
Selecting hardness scale resp. display of active scale.
The default setting is
HV .
Example:
<ESC>UN<CR> Read active hardness scale:
HRC<CR><LF> Result: HRC
<ESC>UN HV <CR> Set HV scale
)
Warning:
When you change the hardness scale, the active
measurement set will be terminated beforehand.
Data transfer with a PC
Interface and peripherals (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 11-21