Branson Krautkramer MIC 10, User Manual

Page: 58 / 146

Storing the measurement in the Data Log-
ger or on the Memory Card
With the MIC 10 DL you can carry out a number of
measurements within a measurement set and store
them.
–
Make certain that the Data Logger is active.
If you wish to work with the Memory Card:
–
Insert it into the slot.
The MIC 10 DL automatically stores the data onto the
Memory Card. The instrument will store onto the inter-
nal Data Logger if there is no Memory Card inserted.
–
Carry out your measurement.
–
After termination of the measurement set, press
-
.
The mesasurement set, including the instrument set-
tings are stored into a file. The file number will appear
on the display, for example with the first file stored:
The MIC 10 DL always stores the data onto the next
free storage space.
You can store 255 measurements in a measurement
set. The Data Logger has capacity for up to 1800
measurements and the Memory Card up to 590 meas-
urements (with an average measurement number of
10 per measurement set).
0
Note:
Before data are stored, the MIC 10 DL automatically
carries out a storage capacity check. An error mess-
age will appear if there is insufficient storage capacity.
Refer to Chapter 9.2
Error messages .
)
Attention:
Do not remove the Memory card whilst you have
access to data because this could damage the card.
Operation
Data storage (only MIC 10 DL)
5-22 Issue 08, 08/01 Krautkrämer MIC 10
Storing the measurement in the Data Log-
ger or on the Memory Card
With the MIC 10 DL you can carry out a number of
measurements within a measurement set and store
them.
–
Make certain that the Data Logger is active.
If you wish to work with the Memory Card:
–
Insert it into the slot.
The MIC 10 DL automatically stores the data onto the
Memory Card. The instrument will store onto the inter-
nal Data Logger if there is no Memory Card inserted.
–
Carry out your measurement.
–
After termination of the measurement set, press
-
.
The mesasurement set, including the instrument set-
tings are stored into a file. The file number will appear
on the display, for example with the first file stored:
The MIC 10 DL always stores the data onto the next
free storage space.
You can store 255 measurements in a measurement
set. The Data Logger has capacity for up to 1800
measurements and the Memory Card up to 590 meas-
urements (with an average measurement number of
10 per measurement set).
0
Note:
Before data are stored, the MIC 10 DL automatically
carries out a storage capacity check. An error mess-
age will appear if there is insufficient storage capacity.
Refer to Chapter 9.2
Error messages .
)
Attention:
Do not remove the Memory card whilst you have
access to data because this could damage the card.
Operation
Data storage (only MIC 10 DL)
5-22 Issue 08, 08/01 Krautkrämer MIC 10