Brady LabelMark 3.1, User Manual

Page: 9 / 114

Getting Started
System Requirements
Following are the recommended requirements for installing and running LabelMark :
•
Intel® Pentium® processor ( minimum 66 MHz 486DX2 )
•
Operating system:
Microsoft® Windows® 98
Microsoft® Windows® 2000 with Service Pack 3
Microsoft® Windows® NT with Service Pack 6a
Microsoft® Windows® XP
•
Microsoft® Internet Explorer 5.01
•
64MB of RAM (minimum 16 MB of RAM)
•
100 MB of available hard-disk space
•
16-bit or greater video display card
•
800x600 or greater monitor resolution
•
CD-ROM Drive
Installing LabelMark
Note: You must have administrative rights on your computer to install LabelMark . If you do not have
administrative rights, speak with your company’s computer system administrator.
To run LabelMark , you must first install it on your computer’s hard drive.
1. Insert the LabelMark CD into your CD drive. The install screen appears.
If the install does not start automatically, select Start Run , type D:\setup.exe and click OK
(replace D: with your CD drive.)
2. Click Install LabelMark .
Note: Installation occurs in a new directory (C:\Program Files\Brady\LabelMark 3), so earlier
versions of LabelMark (prior to version 3.0) will not be overwritten; however, version 3.1 will
overwrite version 3.0.
3. Follow the prompts on your screen.
Upgrading From a Previous Version of LabelMark
If you are upgrading from a previous version of LabelMark , keep the following in mind:
•
The new version does not overwrite versions of LabelMark that are older than version 3.0. You
will be able to run older versions until you remove them from your computer; however, version
3.1
will overwrite version 3.0.
•
You will lose your default settings from the previous version of LabelMark . See Changing User
Defaults to set new preferences.
•
Copy the existing label files you want to keep using to the new default label Files folder.
•
You can open old label files (created with version 1.2 and greater) in the new version of
LabelMark .
Getting Started 3