Transport and storage 31/132
RE 30201-B/07.2014, SYEPS series 1X,
Bosch Rexroth AG
For transporting, the SYEPS punching system can be connected to a lifting device
using several eyebolts or a lifting strap.
Lift the SYEHL punching axis at the eyebolts identified as “lifting points” in the
installation drawing.
Fig. 7: Lifting the SYEHL punching axis out of the packaging
Transport damage must be reported to your contact in the Bosch Rexroth sales
organization within one week. The addresses of sales subsidiaries can be found
on the Internet at:
http:www.boschrexroth.com/addresses
6.1.3 Storing the SYEHL punching axis
The SYEHL punching axis should preferably be stored in the unopened original
packaging.
In the unopened original packaging, the maximum storage time of the SYEHL
punching axis is 6 months.
If the SYEHL punching axis is to be stored longer than 6 months, provide
preservation like for storage after its disconnection and removal (see below).
•
The storage rooms must be free from corrosive materials and gases.
•
The storage rooms must be dry.
•
The ideal storage temperature is b5 °C and +20 °C.
•
Avoid intense light.
•
Do not stack SYEHL punching axes, store them shock-proof and slip-proof.
•
SYEHL punching axes are heavy (see Table 15 “Dimensions and weights” on page
30). Also take account of the permissible weight-bearing capacity of your storage
system.
Requirements
