BOMBARDIER ski-doo Tundra Scandic 2004 Series, Shop Manual

Page: 92 / 427

Section 03 TROUBLESHOOTING
Subsection 05 (ELECTRICAL SYSTEM)
MMR2004-109_03_05A.FM
03-05-3
SYMPTOM STARTER TURNS, BUT OVERRUNNING CLUTCH PINION DOES NOT MESH WITH
RING GEAR.
CONDITION NORMAL USE.
Test/Inspection 1. Check clutch pinion gear and small return spring.
a. Worn clutch pinion gear or damaged small return spring.
Replace damaged part(s).
2. Check clutch.
a. Defective clutch.
Replace clutch.
3. Check brackets.
a. Worn or broken brackets.
Replace brackets.
4. Check movement of clutch on splines.
a. Poor movement of clutch on splines.
Clean and correct.
5. Check clutch bushing.
a. Worn clutch bushing.
Replace clutch.
6. Check starter bushings.
a. Worn starter bushing(s).
Replace bushing(s).
7. Check ring gear.
a. Worn ring gear.
Replace ring gear.
8. Check for proper starter rotation direction.
a. Starter turns in wrong direction, incorrectly installed brushes, wrong polarity or
wrong starter.
Replace starter or reconnect properly.