BOMBARDIER ski-doo Tundra Scandic 2004 Series, Shop Manual, Page: 152 / 427

Section 04 ENGINE
Subsection 04 (593 ENGINE TYPE)
MMR2004-113_04_04A.FM
04-04-9
Install shouldered sleeve.
TYPICAL — SHOULDERED SLEEVE INSTALLATION
Install piston pin puller and turn handle until piston
pin is correctly positioned in piston.
TYPICAL
Use circlip installer (P/N 529 035 686) to install new
mono-hook circlips
no. 20 .
Insert circlip into support in such a way that when
installed in piston groove, the tab will face upward.
With round end of pusher, position circlip perpen-
dicular to the support axis.
With the other end of the pusher, push circlip into the
support groove.
1. Groove
ENGINE TYPE
PISTON CIRCLIP
INSTALLER (P/N)
593 529 035 686
A02C2IA
A02C2JA
A32B0AA
A32B0BA
A32B0CA
A32B0DA
1