BOMBARDIER ski-doo Tundra Scandic 2004 Series, Shop Manual

Page: 298 / 427

Section 06 ELECTRICAL
Subsection 02 (IGNITION TIMING)
MMR2004-130_06_02A.FM
06-02-7
1. Trigger coil mark
2. Magneto flywheel mark
NOTE: These marks cannot be used to check dy-
namic (with engine running) ignition timing with a
timing light: a new mark must be scribed on mag-
neto flywheel for this purpose.
6. Scribe a new mark on magneto flywheel as fol-
lows:
a. Remove the fan cover from the engine.
b. Maintain magneto flywheel so that previous
marks remain aligned.
c. Scribe or punch a mark on magneto flywheel
so that it aligns perfectly with the arrow on
crankcase, refer to illustration. This new tim-
ing mark should be used for future timing
checks (dynamic timing).
d. Reinstall rewind starter.
e. Check the timing with a timing light (P/N 529
031 900).
1. Crankcase arrow
2. Scribe a mark here
3. Maintain verified timing marks aligned (static timing)
Checking Ignition Timing
Use timing light (P/N 529 031 900) and digital in-
duction type tachometer (P/N 529 014 500).
TIMING LIGHT (P/N 529 031 900)
TACHOMETER (P/N 529 014 500)
A17E10A
2
1
A17E0ZA
1
2
3
A00B4FA
F01B1GA