BOMBARDIER ski-doo Tundra Scandic 2004 Series, Shop Manual, Page: 421 / 427

Section 11 WIRING DIAGRAMS
Subsection 01 (WIRING DIAGRAMS)
MMR2004-145_11_01A.FM
11-01-7
Waterproof Connector Housing
Female Connector Housing
To remove:
– Insert tool Snap-on TT 600-5 under lock and twist
to lift it.
– Pry tab to free connector then pull wire out of
housing.
FEMALE CONNECTOR HOUSING — CUT-AWAY
Male Connector Housing
To remove:
– Using a small hook, pull out the lock.
1. Lock
1. Lock
– Pry tab to free connector then pull wire out of
housing.
MALE CONNECTOR HOUSING — CUT-AWAY
TAB AND RECEPTACLE
CONNECTOR INSTALLATION
Prior to installing a connector, make sure locking
tab is sufficiently lifted to properly lock.
Insert tab and receptacle connectors in their re-
spective housings as shown in following illustra-
tions. Push sufficiently so that they snap. Try pull-
ing wire to ensure they are properly locked.
1. Tab
2. Housing
A01E31A
A01E32A
A01E33A
1
A01E34A
1
A01E35A
A00E1GA
1
2