22
AQM - Agile QAM Modulator
Programming a Variable
1. When a user arrives at a screen whose variable needs to
be changed, the user depresses the ENTER button until the
blinking cursor is displayed.
2. After the blinking cursor is displayed the user simply presses
the
▲
(UP) or
▼
(DN) arrow buttons to increment or
decrement to the appropriate desired value.
3. When the user reaches the desired setting the ENTER button
is pressed again to save the change, then the corresponding
AQM module stores the new information.
Interactive Sequence Detail
QAM Mode
The AQM can be set to comply with the ITU-TJ-83 Annex A &
Annex B specifications.
ITU-A - is used for DVB operation
ITU-B - is used for DigiCiper II operation
Encoder
The Encoder selection is only used in ITU-A Mode. If set to ITU-B
Mode, then the Encoder shows NONE.
QAM
The QAM modulation type is user selectable. If the unit is set to
ITU-B Mode, then only QAM 64 or 256 are available.
Alpha
The Alpha setting is used to set the roll-off factor. Settings are
typical depending on the Operation Mode. The standard settings
are as follows:
ITU-A - 15%
ITU-B - 18%
Summary of Contents for AMM-806
