11
AQD - ATSC/QAM Demodulator
Left/Right Sequence Details
• SNR is displayed when an AQD module locks to an input
program channel and indicates the signal to noise ratio of
the input signal and is expressed in dB. The following are
the desired input SNR ranges for the appropriate signal
modulation type:
• NO PROGRAM will be displayed if a valid lock is acquired
but no program signal is actually being detected
• NO SIGNAL indicates that the input signal was not
detected (no RF input)
• PLEASE SCAN indicates a scan was not performed or is
required again
• AUDIO ONLY indicates no video signal
• NO AUDIO indicates no audio signal present
• SCRAMBLED PRG indicates the signal has encryption
NOTE:
The AQD Not Present message will be displayed when
the optional Remote Configuration Server (RCS) Module is
installed in a particular chassis slot.
Excellent =
>30 dB
>38 dB
>38 dB
Good =
25—30 dB
30—38 dB
35—38 dB
Marginal =
18—25 dB
23—30 dB
30—35 dB
Non-Functional =
<18 dB
<23 dB
<30 dB
8VSB
64 QAM
256 QAM
Summary of Contents for AMM-806
