Blonder tongue AMM-806, Reference Manual

Page: 50 / 285

43
Programming a Variable
1. Press the
▲
(UP) or
▼
(DN) arrow navigation keys to scroll to
the desired interactive variable.
2. When a user arrives at a screen whose variable needs to be
changed, the user should depress the ENTER button until the
blinking cursor is displayed.
3. After the blinking cursor is displayed the user simply presses the
▲
(UP) or
▼
(DN) arrow buttons to increment or decrement to
the appropriate desired value.
4. When the user reaches the desired value the user should press
the ENTER button again to apply the change to the unit memory.
The control board then programs the unit to the new setting.
5. The LCD displays an affirmative response after information is
entered correctly for several of the variables. The controller will
display the ENTRY ACCEPTED response as demonstrated below.
Variable Details
INPUT DEMOD MODE:
The DAP is capable of locking to a terrestrial (off-air) 8VSB or
CATV QAM Annex B modulated RF input signal. The selection
of the appropriate signal type must be made by the user to
ensure signals are properly identified during a scan. By setting
the DEMOD MODE the CHANNEL PLAN is automatically set to
BROADCAST for 8VSB signals and STANDARD CATV for QAM
signals or 8VSB signals on the CATV channel plan.
DAP - Digital to Analog Processor
Entry Accepted