Blonder tongue AMM-806, Reference Manual

Page: 11 / 285

44
Switch Settings - AP/AD-1
Blonder Tongue has improved the simplicity of the channel tuning
switch settings for the following products:
1 2 3 4
SWITCH 1
STD
IRC
HRC
Broadcast
Sub Band
(optional)
Switch 2 is used to set the unit
output channel number.
Channel setting is accomplished by setting
the switch to the desired output channel.
Switch 2 is divided into 2 sections,
the Tens section and the Ones section.
In each section, there are 4 switches labeled
8,4,2,1. This corresponds to the switch value.
To set the switch, a user invokes the
corresponding value of the switch.
The values are then added and equated into a
channel number by the unit microprocessor.
A simple chart, shown on the next page, gives the
corresponding switch position for numbers 1 to 12.
The user then sets the Tens section and the Ones
section together to reflect the desired channel.
Example:
For CH 116, you set 11 Tens and 6 ones for 116.
For single digit channels, the Tens switch is set
to zero.
2 banks of switches are presented. Switch 1 has 4 positions and
Switch 2 has 8 positions. Position 1, 2 & 3 of Switch 1 are used
to set the unit operating mode and position 4 turns the FCC
Offsets ON or OFF.
Stock No. Model Stock No. Model
59802 AP-40-550B 59803 AP-40-750B
59817 AP-60-550B 59818 AP-60-750B
5932 AD-1B