Highway Class Paver/Finishers
Drive Train
A-48
THREE SPEED TRACTION
TRANSMISSION ASSEMBLY
(WHEELED)
REMOVAL
Step 1:
Disconnect hydraulic hoses.
a. Disconnect tubes (1) to traction drive motor.
b. Disconnect hoses (2) to shift cap assembly.
c. Mark and cap hoses and plug ports.
1
2
0760-76C
3
Step 2:
Tag and disconnect electrical connections (3) to the
shift cap assembly.
Step 3:
Remove traction transmission assembly.
a. Remove U-bolts holding traction drive shaft (4)
to traction transmission.
4
0760-75A
b. Sling housing and attach to hoist. Take up
slack.
c. Remove mounting bolts (1) at rear of traction
transmission under traction transmission motor.
d. Remove mounting bolts (2) on each side of
traction transmission.
e. Remove traction transmission assembly.
1
2
1144-78
DISASSEMBLY
Step 1:
Drain traction transmission fluid. Transmission
contains 10.5 pts. (5 liters) of fluid.
a. Loosen transmission drain plug (4).
b. Allow transmission fluid to drain into catch
container.
NOTE
Some earlier models have the dipstick tube
attached to the case drain. The dipstick tube
must be removed to drain the fluid.
BK-138
6
7
5
4
Step 2:
Remove traction drive motor (5).
a. Sling housing and attach to hoist. Take up
slack.