Bissell CrossWave 1713 SERIES, User Manual

Page: 9 / 272

Maintenance:
Empty Dirty Water Tank
To release dirty water
tank, press down on
recessed button on the
top of the dirty tank.
Grasp top of dirty water
tank in recessed areas on
each side of the filter and
pull upward to remove the
top of the tank.
To empty, pour dirty water and debris out.
Rinse the inside of the dirty water tank.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
Grab the front handle while
pressing down on button
and pull dirty water tank
away from the unit.
Hand wash the vacuum filter and screen
with warm water and mild detergent.
Rinse the float located at the bottom
of the dirty water tank’s top.
Remove the filter from the dirty water
tank top by pulling it up.
9
www.BISSELL.com
NOTE:
Your dirty water tank is full when the dirty water reaches the MAX fill line
and/or the float shuts off the suction motor.
1 2
3
4 5
6
7
EN