Bissell CrossWave 1713 SERIES, User Manual

Page: 11 / 272

www.BISSELL.com
Maintenance:
Cleaning the Brush Roll and
Brush Chamber
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
Grasp brush roll window
at the front and pull
upward to remove.
With warm water, rinse
your brush roll window
and brush roll.
Turn off and unplug
the machine from the
grounded outlet.
Pull brush roll out by
grabbing the brush roll
tab and pulling upward.
If your brush roll chamber
is dirty, clean with a rag
or towel.
Let your brush roll
and brush roll window
chamber dry before
reassembling.
Replace the brush roll window by first
lining up the brush window tabs with the
edges of the foot. Then press the window
back into place until you hear a click.
Replace brush roll by inserting the brush
roll end into the right side of the foot.
Then lock the pull tab into place by
pressing downward.
11
1 2
3
4 5 6
7 8
TIP: Running your machine with a wet brush roll will help the brush roll dry faster.
EN