Bernette Moscow 2, Instruction Manual

Page: 34 / 139

32
GB
Attention:
Turn power switch to “O” before carrying
out any of the operations below.
Raise the needle to its highest position and
raise the presser foot lever. Attach the
presser foot holder (b) to the presser foot
bar (a). (1) Tighten the fixation screw. (A)
Attaching the presser foot:
Lower the presser foot holder (b) until the
cut-out (c) is directly above the pin (d). (2)
Lower the presser foot holder (b) and the
presser foot (f) will engage automatically.
Removing the presser foot:
Raise the presser foot.
Release the pressure foot by raising lever
(e) located at the back of the foot
holder. (3)
Attaching the seam guide:
Attach the seam guide (g) in the slot as
illustrated. Adjust the distance as required
for hems, pleats, etc....(4)
Attaching the presser foot
holder
EN
E55-E82e_EN_DE_TR_EL_310309:07_55-90e_EN_ES_FR_PT.qxd 31.3.2009 14:35 Seite 32