Benelli Tornado Tre Novicento 903, Workshop Manual

Page: 323 / 336

UK
323
MF9_UK
T T
T T
L I M I T E D E D I T I O N
STEERING
Steering hard Steering ball-bearings damaged Change
Steerring ball-bearings tightened excessively Adjust
Steering pin bent Change
Sterring damper braked excessively Adjust
Steering damper joints damaged Change
Low tire pressure Adjust
The engine tends to swerve or
not proceed in a direct line
Fork bent Change
Frame bent Change
Rear fork bent Change
Steering damper joints damaged Change
Steering ball-bearings damaged Change
Wheel pin bent Change
Rear wheel ball-bearings damaged Change
FRONT WHEEL
Front wheel oscilates/vibrates Wheel rim bent Change
Wheel not balanced Balance
Tire defective Change
Tire not suitable Change
Wheel ball-bearings damaged Tighten
Pin fixing screws not tight Tighten
Pin fixing ring-nut not tight Tighten
Front wheel rotates with difficulty Ball-bearings damaged Change
Wheel pin damaged Change
Brake pads drag excessively on the disks
(see brakes)
Check
Brake disks bent Change
Wheel ring-nut pin tightened excessively Loosen
FRONT SUSPENSION
Front suspension too pliable Fork oil deteriorated Change
Preload spring insufficient Adjust
Hydraulic brake in compression insufficient Adjust
Fork oil level low Refill
Tire pressure low Adjust
Fork damaged Adjust
Front suspension too rigid Preload spring excessive Adjust
Hydraulic brake in compression excessive Adjust
Fork oil level high Adjust
Tire pressure high Adjust
10.2 FRAME