Benelli Tornado Tre Novicento 903, Workshop Manual

Page: 121 / 336

UK
121
MF9_UK
T T
T T
L I M I T E D E D I T I O N
5.1.4 CHECK CHAIN STRETCHER
Check the free sliding of the chain stretcher rod.
Check the state of the chain stretcher spring.
Check the integrity of the chain stretcher.
If an element or its components are damaged or ruined, change
it/them.
5.1.5 MOUNT CAMSHAFT
WARNING:
To mount the camshafts correctly position the olives
on the first cylinder towards the outside on the side
of the distribution chain, position the fixed pad and
then the mobile pad.
Position the exhaust shaft and transmission chain, position the
end shields in the original position (with the writing towards the
outside and with the number on the inside of the head) and
tighten the fixing screws according to the diagram in the figu-
re.
1st phase: 6 N·m; 2nd phase: 13 N·m
Position the suction shaft and the transmission chain, position
the end shields in the original position (with the writing towards
the outside and with the number on the inside of the head)
and tighten the fixing screws according to the diagram in the
figure.
1st phase: 6 N·m; 2nd phase: 13 N·m
DISCHARGH
SUCTION