Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 11 / 336

UK
11
MF9_UK
T T
T T
L I M I T E D E D I T I O N
3
1
4
2
G G
G G
G
eneral
IIIII
nformation
1 GENERAL INFORMATION
1.1 VEHICLE IDENTIFICATION
The identification data are:
1) Frame number silk-screened on Titanium plate.
2) Frame number [on steering casing].
3) Engine number on upper base.
4) Homologation data [on frame].
1.2 IMPORTANT INFORMATION
• REMOVAL AND DISMANTLING
1. Before carrying out dismantling operations, remove eventual dirt, mud, dust
and foreign bodies.
2. Use appropriate instruments and cleaning products exclusively. Refer to the
“SPECIAL INSTRUMENTS” paragraph.
3. During dismantling, avoid separating the coupled components, including
cylinders, pistons, gears and other parts that have become “coupled” during
normal wear. The coupled components must always be re-used or changed
without separating them.
4. During dismantling, clean all the components and place them in a bowl, following
the order of dismantling.
This will make the re-mounting operation easier and allow a correct installation
of all the components.
5. Keep all the components away from any source of heat.
• SPARE PARTS
Use original Benelli spare parts exclusively.
Use oils and greases recommended by Benelli to oil the components.
Other products might appear similar in look and function but are inferior in
quality.