Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 296 / 336

UK
296
MF9_UK
T T
T T
L I M I T E D E D I T I O N
Instruction
Check and note the data on the display of
the diagnostic instrument (see Axone
instruction manual) if available.
Make sure that the voltage through the
battery is acceptable, note the voltage.
Disconnect the ECM and proceed to
location test 1
Make sure that the alternator exit voltage
is acceptable, note the voltage.
Possible cause
Engine voltage system
damaged
Alternator/battery damaged -
low voltage
Alternator damaged - high
voltage
Fault code
P0560
P0562
P0563
VOLTAGE SUPPLY SENSOR – MC 1000 ECM
Instruction
Proceed to test 2
Rectify the fault, proceed to test 3
Proceed to test 3
Locate and repair the cable fault, proceed
to test 3
Activity carried out – terminate the test
Contact the Benelli assistance
Result
OK
Fault
The same through the battery
voltage
Less than through the battery
voltage
OK
F ault
Test
1 - Check the integrity of the terminal
and the cable:
- ECM pin 2/E1
2 - Check the voltage with the engine
running at:
- ECM pin dell’2/E1
3 - Reconnect the cabling, cancel the
fault code and activate the engine
to check the elimination of the fault
LOCATION TEST