Benelli Tornado Tre Novicento 903, Workshop Manual

Page: 227 / 336

UK
227
MF9_UK
T T
T T
L I M I T E D E D I T I O N
7.1.4 CHECK FRONT WHEEL
WARNING:
Change the brake disk fixing screws. The ball-
bearings must be changed if removed.
Carry out the radial and axial check on the front rim (see
"CHECK WHEEL"), using a comparator.
If the value of displacement does not enter within the specific
value, change the piece.
Check the cylindricity of the front wheel pin.
SPECIFIC VALUE
A = 0.05 mm
WARNING:
Do not try to straighten a bent pin.
Check the lateral displacement of the two cylindrical zones (A)
and (B) with respect to one another with a comparator.
The lateral displacement (cylindricity error) must enter within
the specific value.
If the lateral displacement value does not enter within the
specific value, change the piece.
SPECIFIC VALUE
0.05 mm
7.1.5 MOUNT FRONT WHEEL
WARNING:
Before mounting the ball-bearings, identify correctly
the right and left sides of the wheel, based upon the
direction of rotation.
Place the left side ball-bearing (1) first until it touches.
Insert the internal spacer from the right side and place the
right ball-bearing until it touches this spacer.
Position the two brake disks (2) and the fixing screws (3).