Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 325 / 336

UK
325
MF9_UK
T T
T T
L I M I T E D E D I T I O N
Braking power insufficient Disks dirty Clean
Air bubble in hydraulic circuit Purge
Losses in the hydraulic circuit Repair
Clamp seals damaged Change
Pump seals damaged Change
Clamp pistons do not run freely Check
Hydraulic liquid low Refill
Brake disks distorted Change
Pads dragging on brake disks Pad springs damaged Change
Brake disks distorted Change
Clamp pistons do not run freely Check
Hydraulic liquid level too high Adjust
Brake pads worn out Change
EXHAUST PLANT
Exhaust noise excessive Exhaust pipe damaged Change
Fixing pipe loosened Tighten
Poor engine performance Exhaust pipe damaged Change
Fixing pipe loosened Tighten
COOLING PLANT
Engine temperature too high Cooling liquid level too low Refill
Cooling fan defective Change
Expansion tank cooling liquid cap defective Change
Electric fan therrmo-switch defective Change
Sensor temperature instrument defective Change
Thermostat blocked closed Change
Radiator vanes bend or obstructed Repair/clean
Radiator encrusted Clean
Water pump damaged Change
Injection/ignition plant defective Check
Fuel not suitable Change
Engine cooling circuit defective Check
Sparking-plug thermal grade not suitable Change
Accumulation of carbon residues in the head/piston Clean
Engine temperature too low Thermostat blocked open Change