Benelli Tornado Tre Novicento 903, Workshop Manual

Page: 4 / 336

UK
4
MF9_UK
T T
T T
L I M I T E D E D I T I O N
1 GENERAL INFORMATION
11
1.1 VEHICLE IDENTIFICATION 11
1.2 IMPORTANT INFORMATION 11
1.3 SPECIAL INSTRUMENTS 12
1.3.1 SPECIAL ENGINE INSTRUMENTS 13
1.3.2 SPECIAL FRAME INSTRUMENTS 16
2 SPECIFICATIONS
17
2.1 GENERAL SPECIFICATIONS 17
2.2 TECHNICAL CHARACTERISTICS ENGINE 17
2.3 FRAME CHARACTERISTICS 19
2.4 ELECTRICAL COMPONENTS 22
2.5 BOLT TORQUE 24
2.5.1 GENERAL BOLT TORQUE 24
2.5.2 BOLT TORQUE FRAME 25
2.5.3 BOLT TORQUE ENGINE 31
2.6 POINTS TO OIL 34
3 PERIODICAL CHECKS AND ADJUSTMENTS
49
3.1 INTRODUCTION 49
3.2 CHECK SPARKING-PLUGS 53
3.3 CLEAN AIR BOX 54
3.4 GAS COMMAND PLAY 55
3.5 ADJUSTMENT CO 56
3.6 ADJUSTMENT THROTTLE HOUSING 58
3.7 CHECK STEPPER 61
3.8 ADJUSTMENT CLUTCH LEVER PLAY 61
3.9 ADJUSTMENT VALVE PLAY 62
3.10 ENGINE DISTRIBUTION 63
3.11 CHECK ENGINE OIL LEVEL 69
3.12 CHANGE ENGINE OIL AND FILTER 70
3.13 CHECK COOLING LIQUID LEVEL 73
3.14 CHANGE REFRIGERANT LIQUID 74
3.15 FILL COOLING PLANT 76
3.16 CHECK FUEL TUBES 78
3.17 CHECK EXHAUST PLANT 78
3.18 ADJUSTMENT FRONT BRAKE LEVER 78
3.19 ADJUSTMENT REAR BRAKE PEDAL 79
3.20 CHECK BRAKE LIQUID 79
3.21 CHECK FRONT AND BACK BRAKE PADS 80
3.21.1 CHANGE FRONT BRAKE PADS 81
3.21.2 CHANGE REAR BRAKE PADS 81
3.22 CHECK BRAKING PLANT TUBES 82
3.23 PURGE FRONT/REAR BRAKING PLANT 82
3.23.1 PURGE REAR BRAKING PLANT 82
3.23.2 PURGE FRONT BRAKING PLANT 84
3.24 ADJUSTMENT GEAR COMMAND PEDAL 84
3.25 ADJUSTMENT CHAIN 85
CONTENTS CONTENTS CONTENTS CONTENTS CONTENTS