Benelli Tornado Tre Novicento 903, Workshop Manual

Page: 58 / 336

UK
58
MF9_UK
T T
T T
L I M I T E D E D I T I O N
3.6 ADJUSTMENT THROTTLE HOUSING
To be able to accede to the throttle body the following
components need to be dismantled.
Dismantle the mirrors (see "DISMANTLE MIRRORS").
Dismantle the internal instrumentation fastenings (see
"DISMANTLE INTERNAL FASTENINGS").
Dismantle small cap (see “DISMANTLE SMALL CAP").
Dismantle lower semi-cowling (see "DISMANTLE SEMI-
COWLING“).
Dismantle upper cowling (see “DISMANTLE COWLING").
Dismantle cowling under headlight (see "DISMANTLE UNDER
HEADLIGHT").
Dismantle wheel housing (see “DISMANTLE WHEEL
HOUSING").
Remove gearbox (see “DISMANTLE GEARBOX").
Unscrew the gearbox fixing screw without disconnecting it to
allow being able to remove the petrol tank.
Remove the petrol tank (see "DISMANTLE TANK").
Remove the petrol tank in such a way as not to prevent access
to the throttle body but such as to guarantee supply to the
engine.
Dismantle airr box conduits (see "DISMANTLE CONDUITS").
Remove the rear tail piece (see "DISMANTLE TAIL PIECE").
Remove the large rear lead, unhooking it and taking it back a
little to allow dismantling the radiator box conduits.
Dismantle the radiator box conduits (see "DISMANTLE
RADIATOR BOX").
Dismantle airbox (see "DISMANTLE AIR BOX").
Check that the gas cables are mounted correctly and have the
correct amount of play (see "GAS COMMMAND PLAY").