Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 242 / 336

UK
242
MF9_UK
T T
T T
L I M I T E D E D I T I O N
WARNING:
Always change the sealing gaskets at every
dismantling.
Loosen and remove the connecting screws (2), one fixed to
the right brake clamp and the other to the left brake clamp.
Loosen and remove connecting screw (3) of the front brake
pump.
Unhook the brake tube from the eye positioned on the front
mudguard.
Remove the front brake plant tubing.
Be careful with the sealing gasket.
7.3.7 DISMANTLE REAR BRAKE PLANT
TUBES
Remove the rear brake clamp from the clamp support and
position it under the brake pump.
Position the end of a tube of suitable diameter at the purge
screw (1) of a brake clamp and the other end in a suitable
recipient.
Open the purge screw (1) and empty the braking liquid. Remove
the brake tube (2) from the clamp (3), unscrewing screw (4).
NOTE:
To help empty the liquid, open the liquid tank cap
and work on the rear brake lever repeatedly.
Dismantle the footrest (see “DISMANTLE FOOTREST”).
Loosen the idrostop (1) taking care not to twist the cables of
the cabling excessively.
Loosen and remove the two screws (2) and relative nuts (3).
Remove the elastic bands (4) and take the tube (5) of the pump
off.
Rotate the pump freeing the idrostop and removing the rear
brake tube (6).