Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 96 / 336

UK
96
MF9_UK
T T
T T
L I M I T E D E D I T I O N
Check the state of charge of the battery (1) with a tester (2)
functioning as a voltmeter.
If necessary recharge the battery.
SPECIFIC VALUE
Battery charge = 12.5V
WARNING:
These values vary according to the temperature, the
condition of the battery plates and the level of the
electrolyte.
Connect a digital voltmeter to the battery terminals.
Positive tester probe>positive battery terminal.
Negative tester probe>negative battery terminal.
NOTE:
It is possible to check the state of the MF battery
recharging by measuring the tension at empty (i.e.
the tension present with the positive terminal
dfisconnected).
It is not necessary to recharge when the tension at
empty is equal to or superior to 12.8V.
Check the recharging of the battery as illustrated in the diagram
and the follwing example.
Example:
Tension at empty = 12.0 V
Recharging time = 6.5 ore
Recharging the battery = 20 ~ 30%
NOTE:
Do not recharge the battery rapidly.
Ratio between tension at empty and
recharging time at 20°C
Recharging time (hours)
Tensione a vuoto (V)