Benelli Tornado Tre Novicento 903, Workshop Manual

Page: 101 / 336

UK
101
MF9_UK
T T
T T
L I M I T E D E D I T I O N
3.37 CHANGING FRONT LIGHTS
Loosen and remove the four fixing screws (1).
Remove the internal instrument board fastenings (see
"DISMANTLE INTERNAL INSTRUMENT BOARD
FASTENINGS").
Remove left mirror (see "DISMANTLE MIRRORS").
Remove the small cap (2) (see "DISMANTLE SMALL CAP").
Remove the lower left semi-cowling (see ("DISMANTLE
LOWER COWLING").
Remove the upper left cowling (see "DISMANTLE LEFT AND
RIGHT UPPER COWLINGS").
For the position lamp (3), remove the rubber lamp holder and
change the lamp.
For the anti-dazzle lamp (4), remove the rubber dust cover,
disconnect the cabling and change the lamp (4), freeing it from
the spring (5).
Repeat the operation for the anti-dazzle lamp (6), freeing the
lamp (6) from the spring (7).
3.38 ADUSTMENT FRONT HEADLIGHT
To carry out the correct adjustment of the luminous beam
projected by the front headlight, position the vehicle at about
10 metres from a vertical wall on a perfectly flat terrain.
Switch the front headlight on, sit on the vehicle in the driving
position and check that the upper limit of the beam projected
onto the vertical wall in less than about 1/10 with respect to the
the horizontal axis of the lights.