Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 82 / 336

UK
82
MF9_UK
T T
T T
L I M I T E D E D I T I O N
3.22 CHECK BRAKING PLANT TUBES
Sight check the state of the front (1) and rear (2) braking plant
tubes.
If the tubing is broken, excessively worn or losing liquid, change
it.
3.23 PURGE FRONT/REAR BRAKING PLANT
3.23.1 PURGE REAR BRAKING PLANT
WARNING:
Fill with the brake liquid using only the type of liquid
advised in the oils and liquids table of this manual.
Eventual mixing of fluids of a different type might
cause a dangerous chemical reaction and a
diminishing of braking efficiency, with a consequent
increase in the risk of accidents.
WARNING:
Work with maximum care on dismantling the clamps
at the km-counter cable (2).
WARNING:
To carry out the purge of the rear plant, the brake
clamps of the relative support have to be dismantled
and the plant tubing kept as vertical as possible.
Bring the clamps to a higher position by rotating them and
raising them as in the drawing.
WARNING:
During the purge of the braking plant maintain the
level of the tanks between the MIN and MAX levels.
Remove the two rear brake clamps fixng screws (1).