Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 314 / 336

UK
314
MF9_UK
T T
T T
L I M I T E D E D I T I O N
9.15 SPEED SENSOR
When the speed is not indicated on the instrument board,
proceed as follows:
Check the integrity of the fuse.
If the fuse in question is intact, check the speed sensor (1):
1) Remove the vehicle sensor as described in the "ENGINE"
chapter.
2) Disconnect the connector (2), and check that the connector
measures 10K betwen terminal (A) (brown wire) and (B)
(blue wire).
9.16 OIL PRESSURE SENSOR
To check the good functioning of this component, the continuity
between the contact on the sensor (1) and the chassis of the
vehicle must be ascertained with the vehicle not running, as
shown in the figure.
On the contrary, with the vehicle running the contact must be
interrupted.