Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 238 / 336

UK
238
MF9_UK
T T
T T
L I M I T E D E D I T I O N
Loosen and remove the two screws (4).
Remove the complete brake pump (5).
7.3.2 REMOVE REAR BRAKE PUMP
Remove the rear brake pump from the clamp support and
position it under the brake pump.
Position the end of a tube of suitable diameter at the purge
screw (1) and the other end in a suitable recipient.
Open the purge screw (1) and empty the braking liquid. Do the
same thing with the opposite clamp.
NOTE:
To help empty the liquid, open the liquid tank cap
and work on the rear brake lever repeatedly.
Dismantle the footrest (see “DISMANTLE FOOTREST").
First loosen the idrostop (2), making sure not to twist the wires
of the relative cabling excessively.
Loosen and remove the two screws (3) and the relative nuts
(4).