Benelli Tornado Tre Novicento 903, Workshop Manual, Page: 99 / 336

UK
99
MF9_UK
T T
T T
L I M I T E D E D I T I O N
RECHARGING WITH A CONTINUOUS TENSION BATTERY CHARGER
Continue recharging until
the tension reaches 15 V.
Measure the tension at
empty before
recharging.
NOTE:
wait over 30 minutes
before measuring the tension at
empty of the battery
Connect the battery
charger and an ampere
meter to the battery.
Begin the recharging
operation.
Is the amperage higher
thatn the standard
recharge amperage
indicated on the
battery?
Wait more than 30 minutes before measuring the tension at empty of the battery.
12.8 V = recharge completed
12.0-12.7 V = recharging needs to be carried out
less than 12.0 V = change the battery
NOTE:
Set the recharge tension to 16 ~
17V. (if the tension is lower, the
recharge will be insufficient. If the
tension is higher, the battery will
overload).
This kind of battery
charger is not suitable
for an MF battery. We
advise using a variable
tension battery
charger.
NOTE:
Set the recharge time
to a maximum of 20
hours
WARNING:
continuous amperage battery chargers
are not suitable for MF batteries
YES
NO
Recharge
Ampere meter
Voltmeter