3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
3-57
Setting the Eos FireWall Policies
=================================
If you want to configure the Eos as secure
X Terminal, choose the policy "high"
then only X11-Connection are permitted
Choose one of the FireWall Policies
-----------------------------------
1 - "High"
2 - "Medium"
3 - "Disable"
4 - "Don't change the existing FireWall Policy"
Enter the FireWall Policies [2]:
2
You have chosen the FireWall Policy "Medium"
Is this correct? (yes/no)? [yes]:
y
Finishing the configuration
If you do install a monolithic T
RANS
F
ORM
A, configuration is done and the script is finished with the next step.
When configuring a distributed system
you have to specify the data for the central device and the rendering
machines. See section
3.4.3 Configuring a distributed system
*************************************************
* *
* The X Server configuration is finished now, *
* please enter your choice *
* *
*************************************************
1 Exit configuration (all your current entries will be lost)
2 Finish configuration
Enter your X Server Configuration [2]:
2
Configuring the X Server. Please wait ...
***************************************************************
Multiscreen X Server setup done... Have fun!
NOTE: enter "service mmtserv"
to start the X Server
****************************************************************
When configuration is completed, you can enter
service mmtserv
to start the X server:
eos:/opt/MMT2686/config #
service mmtserv
If you operate TransForm A in eXtended safety boot mode, please take care to update the
backup partition after successful configuration, see section
4.8.5 Backup and restore procedures
.
