3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
______________________________________________________
3-5
The
remote power on/off connector
[16] is for connection to O
MNI
B
US
devices.
With the optional connectors
external genlock in
[17] and
external genlock loop through in
[15] an external genlock signal can be con-
nected to multiple P
ROCESSORS
and O
MNI
B
US
devices.
PS/2 mouse
[26] is for plugging in a PS/2 mouse and
PS/2 keyboard
[27] is for plugging in a PS/2 keyboard.
For USB mouse and USB keyboard the
USB plugs
[28] can be used. With the
onboard LAN
adapter
[32] the
network connection can be established.
On the right hand side there are different PCI and PCI Express cards [18-24] inserted depending on the actual
hardware configuration of the P
ROCESSOR
.
To protect the Processor from overheating, the air supply openings in the case shall be kept
free of obstructions!
To disconnect the Processor from the power supply all power cords have to be pulled of the
mains connection [25]. Therefore the back panel has to be easily accessible!
The expansion slots
The P
ROCESSOR
AGS-3328-2/-3 provides six PCI expansion slots for insertion of PCI expansion cards. Whereas the
P
ROCESSOR
AGS-3389-0/-1 provides four PCI expansion slots for insertion of PCI expansion cards and three PCI
Express expansion slots for insertion of 3
rd
party expansion cards like network cards.
The slots are numbered in the following way, if looking from the back to the P
ROCESSOR
:
PCI
1
PCI
2
PCI
3
PCI
4
PCI
5
PCI
6
or
PCIe
x1
1
PCIe
x16
1
PCIe
x1
2
PCI
1
PCI
2
PCI
3
PCI
4
Figure 3-6
numbering of expansion slots on the back panel of the P
ROCESSOR
: AGS-3328-2/-3 (left) or AGS-3389-0/-1 (right)
In the following sections reference is taken to the numbering of the slots.
