3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
3-30
To connect the rendering P
ROCESSORS
to the sub-net either the onboard LAN adapters are used or the rendering
processors are equipped with one network card each:
Sub-net
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
PCI 6
Figure 3-38
Network cards in a rendering P
ROCESSOR
Sub-net
The Sub-net is established via a Gigabit Ethernet Switch. The Gigabit Ethernet Switch connects the rendering ma-
chines and the central device. Up to 7 rendering machines
and the central device
can be connected with one
Gigabit Ethernet Switch.
