Barco TransForm A series, User Manual

Page: 43 / 198

3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
3-25
3.2.10 Dual RGB Input Card
The D
UAL
RGB I
NPUT
C
ARD
provides the capability of displaying RGB monitor signals. One or two analog signals up
to 1280×1024@75Hz are digitized for further processing in T
RANS
F
ORM
A. With the model
RGB-3293-0
it is further-
more possible to combine the capabilities of both input channels to digitize one analog signal up to
2048×1536@65Hz.
Standard
The synchronization modes Hsync+Vsync , Csync and Sync-on-Green are supported.
Connectors
The D
UAL
RGB I
NPUT
C
ARD
has two VGA compatible 15-pin SubMinD connectors. Each is for connecting one RGB
signal to T
RANS
F
ORM
A. If an UXGA signal is inserted it must be connected to RGB In 1 , while RGB In 2 is not avail-
able.
RGB In 2
RGB In 1
Figure 3-31
connector of D
UAL
RGB I
NPUT
C
ARD
Order
Within a single D
UAL
RGB I
NPUT
C
ARD
the numbering of the video channels is as shown in the figure above. For the
order in that the input cards are inserted into T
RANS
F
ORM
A, please see section 3.2.7 Quad Analog Video Card .
Specifications
For detailed technical specifications of the D
UAL
RGB I
NPUT
C
ARD
please refer to section 7.1 Technical data .