Barco TransForm A series, User Manual

Page: 110 / 198

4. Operating
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
4-29
Control panel for Dual RGB Input Card
Figure 4-9
Xvideo control panel
Control
R Intensity of red component
G Intensity of green component
B Intensity of blue component
Lock RGB Change red, green and blue component together
Bright Brightness of display
Live Start the RGB display.
Still Freeze the RGB display.
DRGB 1 Select one D
UAL
RGB I
NPUT
C
ARD
(the cards can be renamed)
Channel 1 Select video channel of the D
UAL
RGB I
NPUT
C
ARD
(max. 2 channels; the channels can
be renamed)
Presets Select a timing (current timing is indicated in the button)
Detect Signal Activate the auto-detect of source timing settings.
In case of a signal loss a blue window is displayed and the string
no signal is shown
within the Presets instead of the before used timing.
Detect Pos Activate auto-detect of source position
Reduction Set the dynamic reduction factor of the frame rate; range (0, 1, 2, ... , 15)
The static frame rate reduction, determined by the input mode (please refer to sec-
tion
4.6.1 The input cards (Dual RGB Input Card) can additionally be reduced by this factor
0: sets dynamic part of frame rate reduction to 1, best quality;
4: sets dynamic part of frame rate reduction to 1/2;
6: sets dynamic part of frame rate reduction to 1/3;
15: sets dynamic part of frame rate reduction to 1/15, best performance
Table 4-11