3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
3-45
3.3.3
Switching off
To switch off T
RANS
F
ORM
A save your work, remove any disk or CD from the drives and exit from any application.
Terminate the X-Server, log on as root and enter
shutdown –h now
for shutting down or
shutdown –r
now
for rebooting.
eos:/root #
shutdown –h now
When T
RANS
F
ORM
A has shut down it switches off automatically.
To avoid any complications, it is recommended to switch off TransForm A in the way
explained above!
The order in which you switch off central processor and rendering machines is insignificant.
If TransForm A is switched off as explained above, not all parts are disconnected from the
power supply. To disconnect the whole device the power switches of all OmniBus devices,
Extender and Processor must be switched off and all power plugs of the devices have to be
pulled out after switching off.
