3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
3-55
Channel reordering
For some installations it is useful to change the order of the projection channels. This can be assigned in the
Channel Reordering section. If you want to reorder the projection channels enter
y
. By entering
n
this section will
be skipped.
X Server's Channel Reordering
=============================
This is the reordering configuration part of the X Server.
It offers the possibility to define the reordering channels section.
The channels section defines the assignment of graphic channels
to projection channels.
Please read the section "X Server Configuration" in the
User's Manual "Eos X Terminal"
Do you want to proceed (yes/no)? [no]:
y
The correlation between graphic channels and projection channels is explained in section
configuration of TransForm A (channels)
. Please have a look there to have a further explanation.
Channel Reordering
==================
Assign to a default graphic channel
a new position in the Display Wall
Channel Reordering:
------------------
1: redefine reordering
2: take default (no reordering)
Enter selection [1]: 1
Enter the list of the default channels [1 2]: 1 2 3 4 5 6 7 8
Enter the list of the new channels [2 1]: 1 3 5 7 2 4 6 8
These are the Reordering Settings for the Monolithic X Server:
=============================================================
1 2 3 4 5 6 7 8 --> 1 3 5 7 2 4 6 8
Everything correct? (yes/no)? [yes]:
y
