3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
3-50
3.4.2
X.11 configuration
For the X.11 configuration of T
RANS
F
ORM
A the script call must be entered in line mode. Therefore leave X.11 for
configuration purposes with the following keys pressed simultaneously:
<Ctrl> <Alt> <Backspace>
Now, back in line mode log in as
root
! The factory set password for root is
barco
:
eos login:
root
Password:
barco
Configuration can be carried out by means of the configuration script
EOSconfig
. To start this script, change the
directory first:
eos:/root #
cd /opt/MMT2686/config/
then execute the script:
eos:/opt/MMT2686/config #
./EOSconfig
EOSconfig
will guide you through the configuration. You can exit configuration without saving the modifications
at any time by pressing simultaneously:
<Ctrl> C
Thus all parameters entered up to now were deleted again. It is more convenient however to check all data nec-
essary for configuration first and then start the script. Therefore you are recommended to read through the fol-
lowing pages of this section before starting the configuration.
Below you can read through a typical course of the configuration script expanded with comments giving more
details.
