3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
______________________________________________________
3-2
3.1
Examining
3.1.1
Processor
The front
13
12
1
8
3
5
4
11
10
6
2
9
1
air supply
2
handle of filter mounting
3
restart button
4
(
reserved)
5
buzzer reset button: power module failed (only applicable with redundant power supply)
6
red LED:
power module failed (only applicable with redundant power supply)
7
yellow LED:
hard disk access
8
green LED:
power on
9
floppy disk drive
(optional)
10
hard disk drive / RAID 1 subsystem / RAID 5 subsystem
11
DVD ROM drive
12
(
reserved)
13
power button
Figure 3-1
front view of the Pr
OCESSOR
Next to the air supply openings [1] there is the handle of the filter mounting [2]. In the center behind the front
flap there are from top to bottom the
buzzer reset button
for power module failure [5], the
lock keyboard
switch
[4] followed by the
restart
button [3] and finally the
power
button [13]. Next to these buttons to the
right side there are three LED’s. In the top position there is a red LED, indicating
power module failure
[6] of a
redundant power module. The yellow LED indicates
hard disk access
[7] and the green LED indicates
power on
[8]. On the right hand side there is optionally the floppy disk drive [9], followed by the DVD ROM drive [11] and
below it the hard disk drive [10].
There are hard disks with parallel ATA (PATA) and serial ATA (SATA) available. They come as standard hard disks,
RAID 1 hard disk system or RAID 5 hard disk system. PATA hard disks might be used in P
ROCESSOR
models
AGS-3328
or
AGS-3389
, SATA hard disks might only be used in P
ROCESSOR
models
AGS-3389
.
The figure above
includes the PATA RAID 1 hard disk drive system.
