Barco TransForm A series, User Manual

Page: 107 / 198

4. Operating
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
4-26
Encoder
manufacturer – type
compression
algorythm IP
protocol Skip bytes
at start Skip bytes
at end Stream
protocol TCP PID
mpeg4 RTP 0 0 auto OFF 0 IndigoVision –
VideoBridge
TM
8000 882
The Barco Indigovision interface tool is required for the streaming!
LANACCESS – onSafe MPEG2 mpeg2 RTP 0 0 auto OFF 0
LANACCESS – onSafe MPEG4 mpeg4 - - - - OFF -
mpeg2 UDP 12 0 auto ON 0 Mavix – MediaRacer 100 /
MediaRacer
150
Multiple ports for TCP possible,
Startstring:
Mavix
mpeg4 UDP 12 0 auto ON 0 Mavix – MediaRacer 100 /
MediaRacer
150
Multiple ports for TCP possible,
Startstring:
Mavix
NiceVision – Recorder Pro mpeg4 RTP 0 0 auto OFF 0
Only CIF resolution, only I and P frames are used.
No successive Video Object Plane (VOP) start markers without data (used in
recorded streams);
Stream must be multicasted and always available on the network (no
stream setup signaling required).
NKF – c15 / c20 / CS20 mpeg2 RTP 0 0 auto OFF 0
The Ethernet interfaces must be set to
Forced 100 Mbps Full Duplex
, when con-
necting to an NKF Switch.
Optibase – MGW3100 mpeg2 – – – auto OFF –
Path 1 – Cx 1800 mpeg2 UDP 0 0 auto OFF 0
Pelco – PelcoNet NET350 h263 RTP 0 0 auto OFF 0
I-frame distance may not be 0.
Pelco – PelcoNet NET4001A mpeg2 RTP 4 0 auto OFF 0
No on-board RCP+ support.
Pelco – PelcoNet NET4001A h263 RTP 0 0 auto OFF 0
No on-board RCP+ support; limited frame rate.
Siemens OTN – MVIDIP mpeg2 – – – – OFF –
Tandberg – E5710 mpeg2 – – – – OFF –
Tandberg – TT6120 mpeg2 UDP 0 0 auto OFF 0, 1, ...
Generates multiple-program transport streams (MPTS). The Video PID is
used to select the program.
Tandberg – TT7116 mpeg2 UDP 0 0 auto OFF 590
Teleste – easi BLUEbox mpeg2 UDP 0 0 auto OFF 0
Teleste – EASI IPE mpeg2 – – – – OFF –
Teleste – EASI MP-E8 / S-Link mpeg4 RTP 0 0 auto OFF 0
Telindus – Cellstack Centauri mpeg2 RTP 0 0 auto OFF 0
mpeg2 UDP 0 0 auto OFF 0 VBrick – VB4000 / VB5000 /
VB6000
ISMA features not supported.
mpeg4 UDP 12 0 auto OFF 0 VBrick – VBXcast 9140-4200 /
VBXcast
9140-4300 ISMA features not supported.
Verint – S1500e / S1600e-T mpeg4 RTP 0 0 auto ON 0