B&R Industries Automation PC 620, User Manual

Page: 200 / 512

200
Commissioning • Connection examples - Automation Panel 900
Automation PC 620 User's Manual V 1.90
3.7 Configuration - Eight Automation Panels via SDL and SDL (optional)
Four Automation Panels (max. UXGA) are connected to the integrated SDL interface via an SDL
cable. Four additional Automation Panels (max. UXGA) are connected to the optional SDL
transmitter. The Automation Panels in each line must be the same type. The display content of
the two lines is different (Extended Desktop), but the displays in the same line show the same
content (Display Clone).
USB is supported up to a maximum segment length of 30 m on the first two displays. Starting at
a segment length of 30 m and higher, USB is only available up to a maximum of 40 m for the first
display. USB devices can only be connected directly to the Automation Panel (without hub).
Figure 93: Configuration - Eight Automation Panels via SDL and SDL (optional)
Automation PC 620
with AP Link
5AC600.SDL0-00
SDL segment length
max.40 meters
Link: 5DLSDL.1000-01
✓ USB OK
Link: 5DLSDL.1000-01
USB OK
0
Graphics Engine 1
Graphics Engine 2
x
Internal APC620
panel number
SDL segment length
max.40 meters
Link: 5DLSDL.1000-01
USB
possible
1
Link: 5DLSDL.1000-01
USB
not possible
2
Link: 5DLSDL.1000-00
3
Link: 5DLSDL.1000-01
USB
possible
Link: 5DLSDL.1000-01
Link: 5DLSDL.1000-00
USB
not possible
8
9
10
11
USB
not possible
USB
not possible
SDL segment length
max.40 meters
SDL segment length
max.40 meters
SDL segment length
max.40 meters
SDL segment length
max.40 meters
SDL segment length
max.40 meters
SDL segment length
max.40 meters
✓
✓
✓
AP Link
connection
Monitor / Panel
connection