B&R Industries Automation PC 620, User Manual

Page: 163 / 512

Commissioning • Installation
Ch
apt
er 3 •
Com
m
is
sio
ning
163 Automation PC 620 User's Manual V 1.90
Chapter 3 • Commissioning
1. Installation
The APC620 systems are mounted with the mounting plates found on the housing. The plates
are designed for M5 screws.
The exact positioning of the mounting holes can be seen in the following drilling templates.
1.1 Important mounting information
• The environmental conditions must be taken into consideration (see Chapter 2 "Technical
data", Section 2.4 "Environmental temperatures for systems with an 815E CPU board" on
page 53, and Section 2.5 "Environmental temperatures for systems with an 855GME
CPU board" on page 56).
• The APC620 is only for operation in closed rooms.
• The APC620 cannot be situated in direct sunlight.
• The ventilation holes cannot be covered.
• When mounting the device, be sure to use the allowed mounting orientations (see
Section 1.3 "Mounting orientation" on page 166).
• Be sure the wall or switching cabinet can withstand four times the total weight of the
PC620.
• When connecting certain cable types (DVI, SDL, USB, etc.), keep the flex radius in mind.
(see Section
Figure 76: Mounting plates for the APC620
9
ø 11
ø 5.4 for M5 screws