B&R Industries Automation PC 620, User Manual

Page: 450 / 512

450
Accessories • Fan kit installation and replacement
Automation PC 620 User's Manual V 1.90
2.3 Procedure for APC620 with 5 PCI slots
• Disconnect the power supply to the Automation PC 620.
• Touch the housing or ground connection (not the power supply!) in order to discharge any
electrostatic charge from your body
• Open the orange front cover. Behind the cover there are 4 Kombitorx screws (T10) that
must be removed.
• After the screws have been removed, the side cover and the fan kit cover can be removed
toward the front.
• If one or more PCI cards are in place, they must be removed before moving on to the next
step.
• If slide-in drive is in place, it also must be removed before moving on to the next step.
Figure 242: APC620 5PCI slots - Remove screws to install/ remove filter kit
Figure 243: APC620 5PCI slots - Remove side cover and fan kit cover
Remove 9 screws
Side cover
Fan kit cover