B&R Industries Automation PC 620, User Manual

Page: 92 / 512

92
Technical data • Entire device
Automation PC 620 User's Manual V 1.90
2.9.21 Slide-in slot 2 drive slot
The "slide-in slot 2" drive slot exists only in APC620 system units with 5 PCI slots. in which case
it is possible to insert a number of slide-in drives. See table for available slide-in drives 8 "Model
numbers - drives" on page 27.
For instructions about installing and replacing a slide-in, see Chapter 7 "Maintenance /
Servicing", Section 3 "Slide-in drive - installation and exchange" on page 455.
The slide-in CD-ROM (5AC600.CDXS-00) and the slide-in DVD-ROM/CD-RW (5AC600.DVDS-
00) and DVD-R/RW, DVD+R/RW (5AC600.DVRS-00) drive are referred to in BIOS as
"secondary master". The slide-in USB FDD drive (5AC600.FDDS-00) is referred to as USB.
Information:
• It is possible to add or remove a slide-in drive at any time.
• In system units with 5 PCI slots, the slide-in USB FDD drive (5AC600.FDDS-
00) must be inserted in slide-in slot 1.
The double CompactFlash slide-in drive (5AC600.CFSS-00) should only be
used in slide-in slot 2.
Caution!
Turn off power before adding or removing a slide-in drive.
Slide-in slot 2
Connection Secondary master IDE device
Accessories Short description
5AC600.CDXS-00 Slide-in CD-ROM
5AC600.CFSS-00 Slide-in CF 2-slot
5AC600.DVDS-00 Slide-in DVD-ROM/CD-RW
5AC600.DVRS-00 Slide-in DVD-R/RW, DVD+R/RW
5AC600.FDDS-00 Slide-in USB FDD
5AC600.HDDS-00 Slide-in hard disk 30 GB 24x7
5AC600.HDDS-01 Slide-in hard disk 20 GB ET
Table 49: Technical data - slide-in slot 2