B&R Industries Automation PC 620, User Manual

Page: 341 / 512

Software • Automation PC 620 with Windows XP Professional
Chap
ter 4
•
Soft
w
are
341 Automation PC 620 User's Manual V 1.90
4.2.5 FAQ
My Automation Panel 900 is still not activated after installing the graphics driver.
After installation, the graphics driver is automatically set to the analog output - RGB (monitor).
As a result, any Automation Panel 900 connected via SDL (Smart Display Link) or DVI remains
switched-off after loading the Intel graphics driver in Windows XP.
Information:
• The panel locking time is only active when the B&R Control Center is open
(when no KCF (Key Configuration File) with panel locking time has been
transferred).
• IF a KCF with a set panel locking time is transferred to the APC620, it is active
even when the B&R Control Center is closed.
Figure 173: Settings after installing the graphics driver
Is set to "Monitor"
after installation