B&R Industries Automation PC 620, User Manual

Page: 293 / 512

Software • Automation PC 620 with BIOS
Chap
ter 4
•
Soft
w
are
293 Automation PC 620 User's Manual V 1.90
BIOS setting Description Setting options Effect
COM C Settings for the internal serial interfaces in
the system. This setting activates the
touch screen in panel PC 700 systems,
and, using SDL transfer technology, also
in Automation Panel 900 display units. Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address Selection of the base I/O address for the
COM C port.
A yellow star indicates a conflict with
another device. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM C
port.
A yellow star indicates a conflict with
another device. IRQ 3, IRQ 4, IRQ 5, IRQ
7, IRQ 10, IRQ 11, IRQ
12
Selected interrupt is assigned.
COM D Configuration of the COM D port for the
serial interface of an automation panel link
slot. The interface is used to operate the
touch screen on connected Automation
Panel 900 units. Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address Configuration of the base I/O address for
the serial COM D port.
A yellow star indicates a conflict with
another device. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM D
port.
A yellow star indicates a conflict with
another device. IRQ 3, IRQ 4, IRQ 5, IRQ
7, IRQ 10, IRQ 11, IRQ
12
Selected interrupt is assigned.
COM E Configuration of the optional COM E port
of a B&R add-on interface option (IF
option). Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address Configuration of the base I/O address for
the serial COM E port.
A yellow star indicates a conflict with
another device. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM E
port.
A yellow star indicates a conflict with
another device. IRQ 3, IRQ 4, IRQ 5, IRQ
7, IRQ 10, IRQ 11, IRQ
12
Selected interrupt is assigned.
LPT This setting is specific to B&R and should
not be changed. Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address Configuration of the base I/O address for
the optional LPT.
A yellow star indicates a conflict with
another device. 278, 378, 3BC Selected base I/O address is assigned.
CAN Configuration of the CAN port of a B&R
add-on interface card. Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address 384/385h None -
Interrupt Selection of the interrupt for the CAN port. IRQ 10 Selected interrupt is assigned.
NMI NMI interrupt is assigned.
Table 206: 855GME - Legacy devices - setting options