B&R Industries Automation PC 620, User Manual

Page: 198 / 512

198
Commissioning • Connection examples - Automation Panel 900
Automation PC 620 User's Manual V 1.90
The cable types and resolutions shown in blue in the previous table can only be implemented
starting with the following Firmware and hardware versions:
The cable types and resolutions shown in green in the previous table can only be implemented
starting with the following Firmware and hardware versions:
15 5CASDL.0150-00
5CASDL.0150-01 5CASDL.0150-00
5CASDL.0150-01 5CASDL.0150-00
5CASDL.0150-01 5CASDL.0150-00
5CASDL.0150-01 -
-
20 5CASDL.0200-00 5CASDL.0200-00 5CASDL.0200-00 5CASDL.0200-00 -
25 5CASDL.0250-00 5CASDL.0250-00 5CASDL.0250-00 - -
30 5CASDL.0300-00 5CASDL.0300-00 5CASDL.0300-10 5CASDL.0300-10 -
40 5CASDL.0400-10 5CASDL.0400-10 5CASDL.0400-10 5CASDL.0400-10 -
Firmware Description Version Note
MTCX FPGA Firmware on the APC620 v 01.15 The version is read from BIOS - see the
BIOS description.
Supported starting with the APC620 /
PPC 700 Firmware upgrade (MTCX,
SDLR, SDLT) V01.10, available in the
download area of the B&R homepage.
MTCX PX32 Firmware on the APC620 v 01.55
SDLR FPGA Firmware on the AP Link SDL receiver v 01.04
SDLT FPGA Firmware on the AP Link SDL transceiver v 00.02
Hardware Description Revision Note
5DLSDL.1000-00 AP Link SDL receiver Rev. B0
5DLSDL.1000-01 AP Link SDL transceiver Rev. B0
Table 131: Requirements for SDL cable with automatic cable adjustment (equalizer)
Firmware Description Version Note
MTCX FPGA Firmware on the APC620 v 01.15 The version is read from BIOS - see the
BIOS description.
Supported starting with the APC620 /
PPC 700 Firmware upgrade (MTCX,
SDLR, SDLT) V01.10, available in the
download area of the B&R homepage.
MTCX PX32 Firmware on the APC620 v 01.55
SDLR FPGA Firmware on the AP Link SDL receiver v 01.04
SDLT FPGA Firmware on the AP Link SDL transceiver v 00.02
Hardware Description Revision Note
5DLSDL.1000-00 AP Link SDL receiver Rev. D0
5DLSDL.1000-01 AP Link SDL transceiver Rev. D0
5AC600.SDL0-00 AP Link SDL transmitter Rev. B3
5PC600.SX01-00 System 1 PCI Rev. E0
5PC600.SX02-00 System 2 PCI, 1 disk drive slot, 1 AP Link slot Rev. D0
5PC600.SX02-01 System 2 PCI, 1 disk drive slot Rev. E0
5PC600.SX05-00 System 5 PCI, 2 disk drive slots, 1 AP Link slot Rev. C0
5PC600.SX05-01 System 5 PCI, 2 disk drive slots Rev. C0
Table 132: Requirements for SDL cable with extender and automatic cable adjustment (equalizer)
Cable
Segment length [m]
Resolution
VGA
640 x 480
SVGA
800 x 600
XGA
1024 x 768
SXGA
1280 x 1024
UXGA
1600 x 1200
Table 130: Segment lengths, resolutions and SDL cable (cont.)