B&R Industries Automation PC 620, User Manual

Page: 326 / 512

326
Software • Automation PC 620 with BIOS
Automation PC 620 User's Manual V 1.90
1.5.6 Upgrading the firmware
Depending on the design, a APC620 system is equipped with several controllers (MTCX, SDLR).
The firmware can be upgraded individually.
• Download and unzip the zip file from the B&R homepage.
• Copy the files to a MS-DOS startup disk (see Section 1.5.7 "Creating a DOS boot diskette
in Windows XP" on page 329 for information about creating a bootable disk or Appendix
A, Section "Creating a bootable USB flash drive" on page 420 about creating a bootable
USB flash drive).
• Insert the diskette in the USB floppy drive or the USB flash drive in the USB port and
reboot the APC620.
• The boot menu is shown after startup
Boot menu options:
1. Upgrade MTCX (APC620/PPC700) PX32 and FPGA
2. Upgrade SDLT (APC620) only
3. Upgrade SDLR (AP800/AP900) on Monitor/Panel
3.1 Upgrade SDLR on AP 0 (AP800/AP900)
3.2 Upgrade SDLR on AP 1 (AP800/AP900)
3.3 Upgrade SDLR on AP 2 (AP800/AP900)
3.4 Upgrade SDLR on AP 3 (AP800/AP900)
3.5 Upgrade all SDR (AP800/AP900)
3.6 Return to Main Menu
4. Upgrade SDLR (AP800/AP900) on AP Link Slot
4.1 Upgrade SDLR on AP 8 (AP800/AP900)
4.2 Upgrade SDLR on AP 9 (AP800/AP900)
4.3 Upgrade SDLR on AP 10 (AP800/AP900)
4.4 Upgrade SDLR on AP 11 (AP800/AP900)
Information:
• The following boot menu options including descriptions are based on version
1.13 of the APC620 / Panel PC Firmware upgrade (MTCX, SDLR, SDLT) disk.
In some cases, these descriptions might not match the version you are
currently using.